Kebutuhan akan printer memang semakin meningkat, terlebih x-ray printer seperti Carestream DRYVIEW 5950 Laser Imager. Namun meskipun canggih, setiap perangkat elektronik tentu saja bisa mengalami error. Oleh karena itu, penting bagi Anda untuk mengetahui macam-macam kode rahasia error printer ini sebab kode-kode tersebut bisa membantu Anda menemukan titik permasalahan serta bagaimana cara mengatasinya.
Display Screen | Web Portal | Web Portal Message | Action |
004 | 01004 | MIM Core: Internal Software Error | Restart the imager. If the error persists, call for service. |
005 | 20-005 | Internal MCS Communications Failure | Restart the imager. If the error persists, call for service. |
| 200 | 04200 | MIM Core: Disk Full | Load the requested film type and size for jobs that are waiting for media. If the error persists, call for service. |
| 400 | 06400 | MIM Core: Image Page Error | Resend the print job from the image source.If the error persists, call for service. |
| 410 | 06410 | MIM Core: Image Rendering Error | Resend the print job from the image source.If the error persists, call for service. |
| 411 | 06411 | MIM Core: Image Data Error | Resend the print job from the image source.If the error persists, call for service. |
| 420 | 06420 | MIM Core: Internal Software Error | Resend the print job from the image source.If the error persists, call for service. |
| 430 | 06430 | MIM Core: Internal Software Error | Resend the print job from the image source.If the error persists, call for service. |
| 001 | 10001 | MIS: Internal Software Error | Restart the imager. If the error persists, call for service. |
| 003 | 10003 | MIS: Image Buffer Error | Restart the imager. If the error persists, call for service. |
| 015 | 10015 | MIS: Database Error | Restart the imager. If the error persists, call for service. |
| 910 | 10910 | MIS: MCS Communication Failure | Restart the imager. If the error persists, call for service. |
| 006 | 20006 | Disconnected or faulty network cable | Check and reconnect the network cable on both ends. Restart the imager. If the error persists, call for service. |
| 154 | 20154 | MCS: Internal Communications Failure | Restart the imager. If the error persists, call for service. |
| 155 | 20155 | Incompatible MCS Printer Configuration for Hardware | Restart the imager. If the error persists, call for service. |
| 156 | 20156 | Incompatible Software Versions Installed | Restart the imager. If the error persists, call for service. |
| 209 | 20209 | Laser Imager Opened During Self Test | Replace/close the cover. Restart the imager. If the error persists, call for service. |
| 449 | 20449 | None | Change the charcoal filter. |
| 550 | 20550 | None | Call service for preventive maintenance. |
| 700 | 20700 | None | Restart the imager. If the error persists, call for service. |
| 701 | 20701 | None | Replace/close the cover. |
| 704 | 20704 | None | The network connection to the imager has been lost. Restart the imager. |
| 705 | 20705 | None | The imager is restarting (for example, during a software update). Wait until the restart is complete. |
| 706 | 20706 | None | A shutdown that was initiated remotely is complete. Restart the imager. |
| 915 | 20915 | Internal Image Data Transfer Failed | Restart the imager. If the error persists, call for service. |
| 919 | 20919 | Internal Image Data Render Failed | Restart the imager. If the error persists, call for service. |
| 002 | 21002 | None | No action. The error may remain until the film cartridge is empty. The film cartridge is operating in manual mode and AIQC is off. |
| 116 | 21116 | Film Jam in Area 1U | Clear the jam. See the procedure later in this section. |
| 116 | 23116 | Film Jam in Area 1L | Clear the jam. See the procedure later in this section. |
| 118 | 21118 or 23118 | Film Supply: Internal Hardware Failure | If the Pause symbol is on, press it to cover the film cartridge. When the Pause symbol stops flashing, remove the film cartridge from the imager. Then reinsert the film cartridge into the imager. If the error persists, call for service. |
| 119 | 21119 or 23119 | Film Supply: Internal Hardware Failure | If the Pause symbol is on, press it to cover the film cartridge. When the Pause symbol stops flashing, remove the film cartridge from the imager. Then reinsert the film cartridge into the imager. If the error persists, call for service. |
| 125 | 21125 or 23125 | Film Supply: Internal Hardware Failure | If the Pause symbol is on, press it to cover the film cartridge. When the Pause symbol stops flashing, remove the film cartridge from the imager. Then reinsert the film cartridge into the imager. If the error persists, call for service. |
| 139 | 21139 or 23139 | Film Supply: Unable to Identify Film Cartridge | If the Pause symbol is on, press it to cover the film cartridge. When the Pause symbol stops flashing, remove the film cartridge from the imager. Then reinsert the film cartridge into the imager. If the error persists, call for service. |
| 145 | 21145 or 23145 | Film Supply: Unsupported Film Type | The imager does not support the loaded film type. Install a cartridge with a supported film type.If the error persists, call for service. |
| 146 | 21146 or 23146 | Film Supply: Unsupported Film Size | The imager does not support the loaded film size. Install a cartridge with a supported size.If the error persists, call for service. |
| 175 | 21175 or 23175 | Rollback Failed to Engage Cartridge | If the Pause symbol is on, press it to cover the film cartridge. When the Pause symbol stops flashing, remove the film cartridge from the imager. Then reinsert the film cartridge into the imager. If the error persists, call for service. |
| 177 | 21177 | Rollback Home Sensor (S2U) Failed to Activate in Specified Time | Open the film supply door, top cover, and left cover. Manually close the upper film cartridge, using the manual rollback knob, to prevent the film from fogging. Reinstall/close the covers. If the error persists, call for service. |
| 177 | 23177 | Rollback Home Sensor (S2L) Failed to Activate in Specified Time | Open the film supply door, top cover, and left cover. Manually close the lower film cartridge, using the manual rollback knob, to prevent the film from fogging. Reinstall/close the covers. If the error persists, call for service. |
| 178 | 21178 or 23178 | Film Cartridge Failed to Open | If the Pause symbol is on, press it to cover the film cartridge. When the Pause symbol stops flashing, remove the film cartridge from the imager. Then reinsert the film cartridge into the imager. If the error persists, call for service. |
| 624 | 21624 or 23624 | Film Supply: Film Calibration Failure | Calibrate again. If the error persists, insert a different film cartridge.If the error still displays, restart the imager. If the error persists, call for service. |
| 631 | 21631 or 23631 | Film Supply: Film Calibration Failure - Dmin Outside Target | The minimum density of the film is too high. Calibration results for this film are outside the normal range. Printing will continue with these parameters. If the prints are not optimal, do the calibration procedure again or insert another film cartridge. |
| 632 | 21632 or 23632 | Film Supply: Film Calibration Failure - Dmax Outside Target | The maximum density of the film is lower than the target density. Calibration results for this film are outside the normal range. Printing will continue with these parameters. If the prints are not optimal, do the calibration procedure again or insert another film cartridge. |
| 931 | 21931 | Upper Film Supply: Internal Communications Failure | Restart the imager. If the error persists, call for service. |
| 931 | 23931 | Lower Film Supply: Internal Communications Failure | Restart the imager. If the error persists, call for service. |
| 931 | 25931 | RFTag: Internal Communications Failure | Restart the imager. If the error persists, call for service. |
| 302 | 26302 | Film Jam in Area 2 | Clear the jam. See the procedure later in this section. |
| 325 | 26325 | Film Jam in Area 2 | Clear the jam. See the procedure later in this section. |
| 326 | 26326 | Film Jam in Area 2 or 3 | Clear the jam. See the procedure later in this section. |
| 543 | 26543 | Film Jam in Area 3 | Clear the jam. See the procedure later in this section. |
| 544 | 26544 | Film Jam in Area 3 | Clear the jam. See the procedure later in this section. |
| 123 | 27123 | Optics: Internal Hardware Failure | Restart the imager. If the error persists, call for service. |
| 931 | 26931 | RFTag: Internal Communications Failure | Restart the imager. If the error persists, call for service. |
| 601 | 27601 | Optics: Calibration Failed | Restart the imager. If the error persists, call for service. |
| 604 | 27604 | Optics: Calibration Failed | Restart the imager. If the error persists, call for service. |
| 607
| 27607
| Optics: Calibration Failed
| Restart the imager. |
| 611
| 27611
| Optics: Internal Hardware Failure
| Restart the imager. If the error persists, call for service. |
| 646
| 27646
| Optics: Internal Hardware Failure
| Restart the imager. If the error persists, call for service. |
| 650
| 27650
| Optics: Internal Hardware Failure
| Restart the imager. |
| 931
| 27931
| Optics: Internal Communications | Restart the imager. If the error persists, call for service. |
501
| 28501
| Processor: Internal Hardware Failure
| Restart the imager. If the error persists, call for service. |
509
| 28509
| Processor Warm-up Failure
| Restart the imager. |
510
| 28510
| Processor: Internal Hardware Failure
| Restart the imager. If the error persists, call for service. |
551
| 28551
| Processor Heater Failure
| Restart the imager. |
554
| 28554
| Processor Over Temperature
| Restart the imager. |
| 931
| 28931
| Processor: Internal Communications Failure
| Restart the imager. |
924
| 29924
| Densitometer: Internal Diagnostic | Restart the imager. |
925
| 29925
| Densitometer: Internal Diagnostic Failure | Restart the imager. |
| 931
| 29931
| Densitometer: Internal Communications Failure
| Restart the imager. If the error persists, call for service. |
| 931
| 36931
| Local Panel: Internal Communications Failure
| Restart the imager. If the error persists, call for service. |
| 935
| 36935
| Local Panel: No Communications | Restart the imager. |